مرحبا بكم في موقعنا الجديد..!!

تفاصيل المنتج

رقم الصنف: 711271
(42)

Passive holder with tilt swivel

0.00 QAR
حافظ على هاتفك الذكي أو جهاز تحديد المواقع (GPS) أو جهازك آمنًا مع مجموعتنا الواسعة من الحوامل عالية الجودة. مصممة لثبات قوي، وزوايا قابلة للتعديل، وسهولة استخدام سلسة أثناء كل قيادة.
متوفر في المخزون
0 العناصر المتبقية في المخزون
غير متوفر في المخزون
لا توجد عناصر متبقية

6 شاهد الناس هذا العنصر خلال الأسبوع الماضي

الكمية:
  • Mastercard
  • Visa

This holder is the perfect choice when you want to have your device installed in place and easy accessible.Safe, efficient and convenient! You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.


The holder is customized with a perfect fit for bare devices (not for case). With tilt swivel, you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Attach the holder onto any flat surface, mount or Pedestal Mount in any vehicle, table top or other location.Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS plastic. Color: Black. Made in Sweden.


Choose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The holder should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.


دليل تركيب المنتج

Passive holder with tilt swivel - Step 1
رقم الخطوة 1

Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

Passive holder with tilt swivel - Step 2
رقم الخطوة 2

Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

Passive holder with tilt swivel - Step 3
رقم الخطوة 3

To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

Passive holder with tilt swivel - Step 4
رقم الخطوة 4

The holder is in place.

Lenovo : Tab K10 TB-X6C6F

4.5
Based on 42 reviews
5 stars
27
4 stars
10
3 stars
3
2 stars
1
1 star
1
Reviewer
John Doe
03/15/2024
Exceptional sound quality and comfort

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum at lacus congue, suscipit elit nec, tincidunt orci. Phasellus egestas nisi vitae lectus imperdiet venenatis. Suspendisse vulputate quam diam, et consectetur augue condimentum in.

Reviewer
Jane Smith
02/28/2024
Great headphones, battery could be better

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum at lacus congue, suscipit elit nec, tincidunt orci. Phasellus egestas nisi vitae lectus imperdiet venenatis.

Reviewer
Michael Johnson
02/15/2024
Impressive noise cancellation

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum at lacus congue, suscipit elit nec, tincidunt orci. Phasellus egestas nisi vitae lectus imperdiet venenatis. Suspendisse vulputate quam diam.

سلة التسوق
    Image

تأسست شركة ثابت في عام 2009 كشركة قطرية متخصصة في تقديم حلول وملحقات تثبيت أوروبية مصممة بدقة. نفخر بتقديم ملحقات عالية الجودة ومتينة، ولقد اكتسبنا ثقة عملائنا في جميع أنحاء دول مجلس التعاون الخليجي، عبر تلبية احتياجاتهم التجارية والشخصية على حد سواء.

عنوان
  • رقم الوحدة - 16, رقم المبنى - 419, رقم شارع - 990
  • رقم منطقة - 52, الريان القديم الدوحة قطر
  • هاتف: +974 4465 2421
  • رقم الوحدة - 10, رقم المبنى - 191, رقم شارع - 750
  • رقم منطقة - 71, أم صلال محمد, الدوحة قطر
  • هاتف: +974 5015 2425

الشروط و القوانين | سياسة الخصوصية | سياسة ملفات الارتباط