مرحبا بكم في موقعنا الجديد..!!

Mount with tilt swivel

رقم الصنف : 216175

For use with Apple MagSafe Charger (Apple article no. MHXH3ZM/A, MX6X3ZM/A) (Not included). ONLY compatible with Apple MagSafe devices or Apple MagSafe accessories. Cig-plug adapter with 2 USB ports: Type-C + Type-A.

Apple iPhone 14 Pro Max

Apple iPhone 14 Pro

more...

السعر
250.00 QAR
الكمية

الوصف

For use with Apple MagSafe Charger (Apple article no. MHXH3ZM/A, MX6X3ZM/A) (Not included). ONLY compatible with Apple MagSafe devices or Apple MagSafe accessories. Cig-plug adapter with 2 USB ports: Type-C + Type-A.

معلومات فنية

Keep your iPhone battery fully charged in a mount for MagSafe Charger, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. The iPhone is held securely in place in an upright position for maximum cellular reception. Cig-plug adapter with 2 USB ports includes.

  • The mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a ProClip mounting platform.

  • This mount is to be used with Apple MagSafe Charger.

  • Note! MagSafe Charger not included, (Apple article. no. MHXH3ZM/A, MX6X3ZM/A).

  • التعليمات

    Please read all of the instructions and look at the pictures before attaching the holder.

  • 1. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the mount is firmly in place, but still can be adjusted.
  • Technical Information Illustration
  • 2. Carefully press the MagSafe Charger downward and forward so it goes into the mount, tighten the fixing screw.
  • Technical Information Illustration
  • 3. Remove the MagSafe charger from the mount: First loosen the fixing screw then push the MagSafe charger out of the mount.
  • Technical Information Illustration
  • 4. The mount is in place.
  • Technical Information Illustration
  • The mount to hold an Apple MagSafe Charger is designed for use in ordinary driving conditions. Please be aware that in certain situations, such as driving on bumpy roads or a sudden braking/maneuvering of a vehicle, it is possible that the Apple MagSafe Charger device may be dislodged from the mount holding it. Use of the mount holding an Apple MagSafe Charger is at the user’s sole discretion and risk. Brodit AB is not responsible for any damage caused by a device being dislodged from the mount holding a MagSafe Charger.
  • Technical Information Illustration

    التوافق

    • Apple : iPhone 14 Pro Max
    • Apple : iPhone 14 Pro
    • Apple : iPhone 14 Plus
    • Apple : iPhone 14
    • Apple : iPhone 13 Pro Max
    • Apple : iPhone 13 Pro
    • Apple : iPhone 13 Mini
    • Apple : iPhone 13
    • Apple : iPhone 12 Pro Max
    • Apple : iPhone 12 Pro
    • Apple : iPhone 12 Mini
    • Apple : iPhone 12

    السلة

    تأسست شركة ثابت في عام 2009 كشركة قطرية متخصصة في تقديم حلول وملحقات تثبيت أوروبية مصممة بدقة. نفخر بتقديم ملحقات عالية الجودة ومتينة، ولقد اكتسبنا ثقة عملائنا في جميع أنحاء دول مجلس التعاون الخليجي، عبر تلبية احتياجاتهم التجارية والشخصية على حد سواء.

    • بريد الكتروني: info@thabt.qa
    • هاتف: +974 4483 2731
    عنوان
    • رقم الوحدة - 16, رقم المبنى - 419, رقم شارع - 990
    • رقم منطقة - 52, الريان القديم الدوحة قطر
    • هاتف: +974 4465 2421
    • رقم الوحدة - 10, رقم المبنى - 191, رقم شارع - 750
    • رقم منطقة - 71, أم صلال محمد, الدوحة قطر
    • هاتف: +974 5015 2425

    الشروط و القوانين | سياسة الخصوصية | سياسة ملفات الارتباط