مرحبا بكم في موقعنا الجديد..!!

تفاصيل المنتج

رقم الصنف: 714161
(42)

Holder for Cable Attachment

0.00 QAR
حافظ على هاتفك الذكي أو جهاز تحديد المواقع (GPS) أو جهازك آمنًا مع مجموعتنا الواسعة من الحوامل عالية الجودة. مصممة لثبات قوي، وزوايا قابلة للتعديل، وسهولة استخدام سلسة أثناء كل قيادة.
متوفر في المخزون
0 العناصر المتبقية في المخزون
غير متوفر في المخزون
لا توجد عناصر متبقية

6 شاهد الناس هذا العنصر خلال الأسبوع الماضي

الكمية:
  • Mastercard
  • Visa

The cable attachment holder can be combined with the Apple original Lightning to Typ C Cable that came with your iPhone. You can charge you iPhone by connecting it to the car’s Typ C socket, or use it with a Typ C/cig-plug adapter for the car’s 12V socket.


Note! Cable not included.


The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.


The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.


دليل تركيب المنتج

Holder for Cable Attachment - Step 1
رقم الخطوة 1

Place the connector of the cable in the hole in the lower part of the holder. Carefully press the connector downward and forward so it passes the locking and goes into the hole. Press until you hear/feel the connector snap into place in the holder.

Holder for Cable Attachment - Step 2
رقم الخطوة 2

Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

Holder for Cable Attachment - Step 3
رقم الخطوة 3

Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.

Holder for Cable Attachment - Step 4
رقم الخطوة 4

The holder is in place.

Apple : iPhone 11 Pro

4.5
Based on 42 reviews
5 stars
27
4 stars
10
3 stars
3
2 stars
1
1 star
1
Reviewer
John Doe
03/15/2024
Exceptional sound quality and comfort

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum at lacus congue, suscipit elit nec, tincidunt orci. Phasellus egestas nisi vitae lectus imperdiet venenatis. Suspendisse vulputate quam diam, et consectetur augue condimentum in.

Reviewer
Jane Smith
02/28/2024
Great headphones, battery could be better

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum at lacus congue, suscipit elit nec, tincidunt orci. Phasellus egestas nisi vitae lectus imperdiet venenatis.

Reviewer
Michael Johnson
02/15/2024
Impressive noise cancellation

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum at lacus congue, suscipit elit nec, tincidunt orci. Phasellus egestas nisi vitae lectus imperdiet venenatis. Suspendisse vulputate quam diam.

سلة التسوق
    Image

تأسست شركة ثابت في عام 2009 كشركة قطرية متخصصة في تقديم حلول وملحقات تثبيت أوروبية مصممة بدقة. نفخر بتقديم ملحقات عالية الجودة ومتينة، ولقد اكتسبنا ثقة عملائنا في جميع أنحاء دول مجلس التعاون الخليجي، عبر تلبية احتياجاتهم التجارية والشخصية على حد سواء.

عنوان
  • رقم الوحدة - 16, رقم المبنى - 419, رقم شارع - 990
  • رقم منطقة - 52, الريان القديم الدوحة قطر
  • هاتف: +974 4465 2421
  • رقم الوحدة - 10, رقم المبنى - 191, رقم شارع - 750
  • رقم منطقة - 71, أم صلال محمد, الدوحة قطر
  • هاتف: +974 5015 2425

الشروط و القوانين | سياسة الخصوصية | سياسة ملفات الارتباط