مرحبا بكم في موقعنا الجديد..!!

Headrest mount

رقم الصنف : 216139

Mounting kit: Two headrest mounts + Mounting plate with Vesa 75/100+ multiple AMPS holes. 120x120 mm, thickness 9 mm. Fits headrests with dimensions between the bars: Min. inner size 95 mm, Max. outer size 211 mm.

الكمية

إنتهى من المخزن

الوصف

Mounting kit: Two headrest mounts + Mounting plate with Vesa 75/100+ multiple AMPS holes. 120x120 mm, thickness 9 mm. Fits headrests with dimensions between the bars: Min. inner size 95 mm, Max. outer size 211 mm.

معلومات فنية

This mounting kit consists of two headrest mounts and a mounting plate. Brodit's headrest mount works as a mounting platform. Combined with the large mounting plate, it provides a very firm and sturdy attachment point for larger equipment such as protective shields in taxis or driving school cars (shield NOT included).

  • Mounting plate:

  • With Vesa 75/100+ multiple AMPS holes. 120x120 mm, thickness 9 mm.

  • Headrest mount:

  • Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.

  • Minimum inner size between headrest bars: 95 mm.

  • Maximum outer size between headrest bars: 211 mm.

  • Made of high grade Acetal/ABC plastic. Color: black. Made in Sweden.

  • التعليمات

    Please read all of the instructions and look at the pictures before attaching the headrest mount.

  • 1. Use the enlcosed tool to remove the screws in one of the headrest mounts so you get two parts. Place the back part of the headrest mount onto the front side of the headrest. Place the other part of the headrest, equipped with a mounting plate, onto the back part of the headrest mount so the screws match the holes. Tighten the two screws a little bit, just so the headrest mount is in place.
  • Technical Information Illustration
  • 2. Use the other enclosed tool to loosen the screw underneath the headrest mount. Adjust the mounting plate into desired position. Tighten the screw underneath the headrest mount so the mounting plate is firmly in place. Adjust the height of the headrest mount into desired position. Tighten the screws so the headrest mount is firmly in place.
  • Technical Information Illustration
  • 3. Attach the other headrest mount the same way. Attach the mounting plate with the enclosed screws.
  • Technical Information Illustration
  • 4. The headrest mount is in place.
  • Technical Information Illustration

    التوافق

      ...

    السلة

    تأسست شركة ثابت في عام 2009 كشركة قطرية متخصصة في تقديم حلول وملحقات تثبيت أوروبية مصممة بدقة. نفخر بتقديم ملحقات عالية الجودة ومتينة، ولقد اكتسبنا ثقة عملائنا في جميع أنحاء دول مجلس التعاون الخليجي، عبر تلبية احتياجاتهم التجارية والشخصية على حد سواء.

    • بريد الكتروني: info@thabt.qa
    • هاتف: +974 4483 2731
    عنوان
    • رقم الوحدة - 16, رقم المبنى - 419, رقم شارع - 990
    • رقم منطقة - 52, الريان القديم الدوحة قطر
    • هاتف: +974 4465 2421
    • رقم الوحدة - 10, رقم المبنى - 191, رقم شارع - 750
    • رقم منطقة - 71, أم صلال محمد, الدوحة قطر
    • هاتف: +974 5015 2425

    الشروط و القوانين | سياسة الخصوصية | سياسة ملفات الارتباط