Please read all of the instructions and look at the pictures before attaching the mounting adapter.
1. Loosen the screw in the center of the adapter so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the adapter over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the adapter toward you and hold it slightly tensed, in the same time tighten the screw so the adapter is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the adapter is firmly in place, but still can be adjusted.
3. Place the device over the adapter and press it straight downward so it slides into place. In order to remove it, press it straight upward and slide it out from the adapter.
