Thabt Mounts| Complete Mounting Solutions For Any Vehicle

Active holder for fixed installation

رقم الصنف : 527844

2A charger. Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. With USB Type C charging cable.

الكمية

إنتهى من المخزن

طلب مسبق

الوصف

2A charger. Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. With USB Type C charging cable.

معلومات فنية

Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

12 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger, professional installation recommended.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).

التعليمات

Please read all of the instructions and look at the pictures before attaching the holder.

1. Adjust the holder to fit your device: Loosen the screws on the front of the holder to enable the side arms to move. Insert your device and gently press the side arms inward so the device is held firmly in place. Carefully remove the device without moving the side arms. Tighten the screws to lock the position.

2. To install the holder: Loosen the center screw on the holder to detach the tilt swivel mounting plate on the back.

3. Position the plate where desired and secure it using the supplied screws. Place the holder over the plate so the center screw aligns with the hole in the swivel. Tighten the screw until the holder is secure, yet still adjustable for angle.

4. The holder is now securely mounted and ready for use.

التوافق

...

تأسست شركة ثابت في عام 2009 كشركة قطرية متخصصة في تقديم حلول وملحقات تثبيت أوروبية مصممة بدقة. نفخر بتقديم ملحقات عالية الجودة ومتينة، ولقد اكتسبنا ثقة عملائنا في جميع أنحاء دول مجلس التعاون الخليجي، عبر تلبية احتياجاتهم التجارية والشخصية على حد سواء.

بريد الكتروني: info@thabt.qa
هاتف: +974 4483 2731