الوصف

5-way desktop charging dock.

معلومات فنية

This table stand includes five Brodit slide-in holders, designed for Zebra ET60/ET65 tablets with Android or Windows. The holders feature an adjustable connector mount to match the USB-C port position, which differs between Android and Windows versions.

The kit includes one plastic base, five metal brackets, five holders, and mounting screws. Ideal for organizing, charging, and storing multiple tablets in one place.

التعليمات

Please read all of the instructions and look at the pictures before installing the product.

1. Place a metal bracket on the back of a holder. Align the holes and fasten the bracket using the supplied screws. Then place the holder onto the base plate and make sure the holes align. Fasten the bracket to the base plate from underneath using the supplied screws. Repeat the process for each holder.

2. Adjust the connector mount on each holder depending on the tablet model used. Loosen the screws on the connector mount, raise or lower the mount to align it with the USB-C port on the tablet, then re-tighten the screws. The Android and Windows versions of the Zebra ET60/ET65 have different port positions, which requires individual adjustment.

3. Carefully slide the tablet sideways into the holder until it is fully seated. Push the spring lock downward to secure the device. To remove the tablet, push the spring lock upward and slide the device out of the holder.

4. Holder fully assembled.

التوافق

• Zebra : ET65W Windows
• Zebra : ET65 Android
• Zebra : ET60W Windows
• Zebra : ET60 Android