Thabt

Passive holder with tilt swivel

رقم الصنف : 217080

Zebra ZQ310 Plus

الكمية

إنتهى من المخزن

طلب مسبق

معلومات فنية

This mount offers an easy and secure way to mount your printer. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit. Attach onto a Pedestal Mount or a high strength ProClip mounting platform.

The holder is equipped with a tilt swivel so you can easily adjust the angle. Tilts 17° and swivels 360°. With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.

التعليمات

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Place the lower part of the device in the lower part of the holder. Press/flip the upper part of the device downard into the holder.

To remove the device from the holder: Press the upper part of the holder upward. Pull the upper part of the device away from the holder. Lift the device up out from the holder.

4. The holder is in place.

التوافق

Zebra : ZQ310 Plus

شركة ثابت، شركة قطرية متخصصة في توفير حلول تركيب المركبات المصممة بدقة. تأسست عام ٢٠٠٩، ونقدم ملحقات عالية الجودة ومتينة، تحظى بثقة عملائنا في جميع أنحاء دول مجلس التعاون الخليجي، سواءً للاستخدامات التجارية أو الشخصية.

بريد الكتروني: info@thabt.qa
هاتف: +974 4483 2731