مرحبا بكم في موقعنا الجديد..!! إكتشف مجموعتنا الواسعة من خيارات التثبيت المصممة خصيصاً لسيارتك..!

Holder with spring-lock

رقم الصنف : 747389

Active holder for fixed installation. With USB-cable. 2 USB ports: QC 3.0A + 2.4A. 12/24 Volt. 2A charging. With tilt swivel.

Samsung Galaxy Tab A9+ 11 SM-X210/SM-X215 LTE/SM-X216 5G

الكمية

إنتهى من المخزن

الوصف

Active holder for fixed installation. With USB-cable. 2 USB ports: QC 3.0A + 2.4A. 12/24 Volt. 2A charging. With tilt swivel.

معلومات فنية

The holder with locking is to be used when you want to have your tablet extra firmly in place. The holder has a spring stud locking device, it keeps your device in a firm grip in the holder.

  • For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB ports: QC 3.0A + 2.4A. Connect the power cable with a 2A fuse. Professional installation recommended.

  • The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.

  • An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on a Pedestal mount or a Brodit headrest mount.

  • التعليمات

    Please read all of the instructions and look at the pictures before attaching the holder.

  • 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.
  • Image
  • 2. Slide the device sideways carefully into the holder. Slide the locking part sideways.
  • Image
  • 3. Slide the locking part sideways. Slide the device sideways out of the holder.
  • Image
  • 4. The holder is in place. Switch between portrait and landscape mode by turning the holder into desired position.
  • Image

    التوافق

    • Samsung : Galaxy Tab A9+ 11 SM-X210/SM-X215 LTE/SM-X216 5G

    السلة