معلومات فنية

Keep your handheld device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.

The ProClip is car specific, it is customized for each car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!

The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.

- Do you want to be able to switch between several holders on the same ProClip? Please see Brodit’s MultiMoveClip.

- Are you installing larger devices or heavier equipment? Please see Brodit’s Extra Strength Mounting Platforms and Pedestal Mounts.

التعليمات

Please read all of the instructions and look at the pictures before attaching the ProClip mount. It is important to install the mount first: any device holder/equipment is to be attached after the mount is in place. It is important to install the mount in the exact same position as shown on the pictures.

1. Use the enclosed alcohol pad to clean the area where the mount will be installed. Peel off the adhesive tape cover. Hold the mount so the left side is aligned with the center of the power button above.

2. At first, press one coner of the lower edge of the mount into the gap between the frame surrounding the air vent and the trim. Then press all of the lower edge into the gap.

3. Press the top of the top frame surrounding the air vent slightly upwards. Press froward on the upper part of the mount so the edge goes into the gap behind the top frame. Adjust the mount sideways until the upper edge sits fully in the gap, placed between the notches in the gap.

4. The ProClip mount is in place.

التوافق

• Toyota : Prius
• Toyota : Prius