الوصف

Extra strength mounting bracket for installation of heavier devices.

معلومات فنية

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.

التعليمات

Please read all of the instructions and look at the pictures before attaching the mounting platform. It is important to install the product in the exact same position as shown in the pictures. This product consists of two parts.

Part 1. Mounting bracket (the smallest part)

Part 2. Face plate

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Press the grooved edge on the lower part of Part 1 into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the upper part of Part 1 so the grooved edge goes into the gap next to the gap opener. Press forward alternately on the left and right side of the upper part of Part 1 until you hear/feel it snaps into place. Pull out the gap opener.

2. Peel off the adhesive tape cover on Part 2. place Part 2 onto Part 1.

3. Press downward on top of Part 2 so the adhesive tape attaches to the dashboard. Attach Part 2 onto Part 1 with the enclosed screws.

4. The mounting platform is in place.

التوافق

• Volvo : S80
• Volvo : V70 II
• Volvo : XC70